How To Add Svg Files To Silhouette Library

This mail may contain Amazon Associate and other partner affiliate links. As an Amazon chapter, I earn a pocket-sized commission from these links at no additional toll to you.

At that place are many, many, many awesome SVG files from bloggers, Etsy, and creative sites effectually the web. Here is how to upload SVG files into Silhouette Studio Software to employ with your Silhouette Cutting Machine.

How to upload SVG and other Files into Silhouette Studio software

I would similar to first note that yous can get the basic software of Silhouette Studio for free hither.

In club to upload SVG files into your software, y'all must have an upgraded version of Silhouette Studio. Silhouette Studio Designer Edition or Business organisation Edition. You can notice out more almost each of the upgrades here.

The free version will non import an SVG file, HOWEVER, information technology will upload a DXF file and almost all graphic designers volition provide that file along with the SVG. The upload process is the verbal same for a DXF so keep following along Silhouette Studio users!

How to Upload SVG Files into Silhouette for

Pin It For Later

Click the button above to save to your board for later!

What is an SVG File?

An SVG file is a Scalable Vector Graphic. In short, that translates into a blueprint that will go along its amazingness no matter how small-scale or large yous adjust the size of the design. Y'all tin notice everything you demand to know near SVG files explained here. This folio will assist yous download the files to your reckoner, extract files and which programs can open SVG files

Learn what an SVG file is, the programs that can open them and how to use them!

What is the Difference Between uploading an SVG vs. an image?

When you import SVGs, the file uploads are fix to cut. You can change the size without any distortion and you can plough on and off layers to make customizing easier.

When you import an paradigm such as a png or jpg file, you will need to use the trace feature in order to create cutting lines within the Silhouette software. This can get tricky depending on the complexity of your prototype and it will non create layers as an SVG file.

How to download an SVG onto a Reckoner

Whether you get a costless svg or purchase i from an svg store, well-nigh probable the file volition exist delivered via a null folder. You will need to extract the zip bulldoze and save the files onto your figurer. I like to create a folder to proceed them all in i place. Most normally, the zip folder will contain an SVG, PNG, JPEG, DXF, and sometimes even PDF files. Y'all tin can find detailed directions on downloading and extracting files to your estimator here.

How to Upload SVG Files into Silhouette Studio Software:

Time needed:1 minute.

At that place are no hoops to jump through when using Silhouette Studio and your own designs. Information technology is so easy. Here is how to upload free SVG files and files you may take purchased from an SVG shop to Silhouette Studio to utilise with your cut machine.

Open Silhouette Studio
Open a new sheet in Silhouette Studio. The costless version will allow uploads of .DXF files, Designer Edition or to a higher place will allow .SVG or .DXF Files.
Open up your SVG File
In the upper left corner select FILE > OPEN, or utilise the shortcut CTRL+O for PC users, or click the open up folder icon.
An explorer window will open and you can locate the file on your calculator. Select the File and click OK.
DONE!
That's it! I told you that was easy! Your design file should be on your canvas now so you can continue to add features or you can brand information technology!

Y'all are done! It was THAT easy! It will then display the file on your canvass screen in Silhouette Studio.

how to upload svg files into silhouette studio

From hither you may resize, edit, etc.

Why Is My Silhouette Merely cutting a Box effectually my SVG file?

When you lot are ready to cut your file, exist certain to double-check the cut lines. Often when importing files from other sources your program will just assume there are no parts of your design and it will just cut a box. This is really easy to change.

In Silhouette Studio look in the upper right corner and select the SEND tab.
This will open a window with more tabs to cull from. Select SIMPLE.
Within the Simple Tab make sure you take CUT selected.

Then your design will await something like this:

Fixing Cut Lines when uploading files into Silhouette Studio

Exist sure to sign up for my emails regarding Silhouette Specific projects, tutorials, and more!

Check out my Silhouette Page with these tutorials, projects and more:

How to Utilise the Print & Cut Feature
Cutting Vinyl on a Silhouette auto (coming soon)
Cutting Multiple Vinyl Colors on a Silhouette auto (coming soon!)

This mail service may contain Amazon Associate and other affiliate links.
As an Amazon affiliate, I earn a modest commission from these links at no boosted cost to you.